Find your size
There are two ways to find out what your ring size is. You can either measure directly on your finger or you can use an existing ring that fits you well to determine the size:
Option 1: Measure on your finger
Measure your finger to determine the circumference. In the table below you can read off the ring size that fits your finger.
Step 1: Take a thin thread or piece of paper and wrap it around the finger you want to wear the ring on. Make sure that the thread or paper is close to your finger but does not cut into it.
Step 2: Mark the place where the thread or paper overlaps.
Step 3: Measure the length of the thread or paper in millimetres.
Step 4: Compare the measured length with the ring size chart. The measured length indicates the circumference.
Tips:
- Miss your finger in the evening
- Avoid measuring your finger in hot or cold temperatures, room temperature is optimal
- Note that there is a slight difference in size between your two hands
- Check that the ring size you have chosen is sufficient to allow the ring to slide smoothly along the length of your finger
Option 2: Measure existing ring
When measuring an existing ring, the inside width of the ring is the ring diameter in our size chart.
Step 1: Choose a well-fitting ring that you already own and that fits perfectly on the finger you want.
Step 2: Measure the inside width of the ring in millimetres. Make sure you measure the centre of the ring.
Step 3: Compare the measured width with the ring size chart to determine your appropriate ring size.
Size Chart
|
DANIEL MASON |
Circumference (mm) |
Ring diameter (mm) |
|
6 |
51 |
16.2 |
|
6 |
52 |
16.6 |
|
6.5 |
53 |
16.9 |
|
7 |
54 |
17.2 |
|
7 |
55 |
17.5 |
|
7.5 |
56 |
17.8 |
|
8th |
57 |
18.1 |
|
8th |
58 |
18.5 |
|
8.5 |
59 |
18.8 |
|
9 |
60 |
19.1 |
|
9.5 |
61 |
19.4 |
|
10 |
62 |
19.7 |
|
10 |
63 |
20.1 |
|
10.5 |
64 |
20.4 |
|
11 |
65 |
20.7 |
|
11.5 |
66 |
21.0 |
|
12 |
67 |
21.3 |
|
12 |
68 |
21:6 |
|
12.5 |
69 |
22.0 |
|
13 |
70 |
22.3 |
|
13.5 |
71 |
22.6 |
|
14 |
72 |
22.9 |
|
14 |
73 |
23.2 |
|
14.5 |
74 |
23:6 |
|
15 |
75 |
23.9 |
There are two ways to find out what size bracelet you should order. You can either measure your wrist circumference with a tape measure or use a thread to determine the size.
Measure with the tape measure:
When measuring with a tape measure, you can directly read the circumference of your wrist in centimetres. The sizes of our bracelets are given in centimetres, so that your measured length corresponds to the size of our bracelets.
Measure with a thread:
When measuring with a thread, place it around your wrist until it overlaps and then measure the length of the thread to that point.
Step 1: Take a thin thread and wrap it around the wrist where you want to wear the bracelet. Make sure the thread is not too tight or cutting, you can also extend the length if you prefer a looser fit.
Step 2: Mark the point where the thread overlaps.
Step 3: Measure the length of the thread in centimetres.
Step 4: The measured length in centimetres corresponds to the size of the bracelet.